STANDARD TERMS AND CONDITIONS:
30% DOWNPAYMENT WITH YOUR PURCHASE ORDER,
60% AT TIME OF SHIPMENT AND THE REMAINING
10% WITHIN 30 DAYS AFTER SHIPMENT.
PRESSES SHIPPED OUTSIDE THE USA
REQUIRE 30% DOWNPAYMENT WITH
YOUR PO & PAYMENT IN FULL AT
TIME OF SHIPMENT.
GENEROUS LEASE TERMS ARE AVAILABLE
PRESSES INTENDED TO PUNCH ROUND HOLES ONLY, UNLESS YOU REQUEST A TIMED RAM, ALLOWING YOU TO PUNCH SHAPES.
LIFT COMPLIANCE SPRINGS AVAILABLE $175/$250
TOOLING IS STANDARD OFF THE SHELF TOOLING PROVIDED BY MOST PUNCH & DIE MANUFACTURERS.
MODULAR GANG PRESS LINE
PRESSES TO POWER YOUR DIE SETS
SPECIAL APPLICATION PRESSES
ALL QUOTED TO MEET YOUR REQUIREMENTS
FLANGE PRESSES [NOT INCLUDUNG A POWER SUPPLY]
TONNAGE THROAT DEPTH OPERATING PRESSURE PRICE EACH
10-TON 3.25 2000PSI $1800
20-TON 3.25 3000PSI $2100
30-TON 3.25 3000PSI $2500
40-TON 3.5 3000PSI $3600
50-TON 3.5 3000PSI $4400
60-TON 6.0 4400PSI $4950
70-TON 6.0 4400PSI $5335
90-TON 6.0 4400PSI $6050
125-TON 6.0 4400PSI $7150
WEB PRESSES [NOT INCLUDING A POWER SUPPLIY]
TONNAGE THROAT DEPTH OPERATING PRESSURE PRICE EACH
30-TON 4.5 3000PSI $3500
40-TON 6.0 3000PSI $4500
40-TON 12.0 3000PSI $5000
50-TON 8.0 3000PSI $4800
50-TON 12.0 3000PSI $5500
60-TON 12.0 4400PSI $6000
70-TON 12.0 4400 PSI $7000
90-TON 12.0 4400PSI $8000
90-TON 18.0 4400PSI $9500
125-TON 12.0 4400PSI $11000
HYDRAULIC POWER SUPPLIES
2-HP 120 VOLT, 1.5 GPM, OPERATING @ 2000 PSI $1600
5-HP 240/480 VOLTS, 3.5 GPM, OPERATING @ 2000/3000 PSI $1800
10-HP 240/480 VOLTS, 7.0 GPM, OPERATING @ 2000/3000 PSI $2400
10-HP 240/480 VOLTS, 5.0 GPM, OPERATING @ 2000/4400 PSI $2400
15-HP 240/480 VOLTS, GPM & OPERATING PSI, PER YOUR NEEDS $3200
20-HP 240/480 VOLTS, GPM & OPERATING PSI, PER YOUR NEEDS $3800
25-HP 240/480 VOLTS, GPM & OPERATING PSI, PER YOUR NEEDS $4200
POWER SUPPLIES COME WITH:
BARE-MOTOR, ADD $450 FOR MOTOR STARTERS FOR 5-15 HP MOTORS.
MOTOR STARTER FOR 20 & 25 HP MOTORS QUOTED.
STANDARD HOSE LENGTHS ARE 12 FEET LONG. ADDTIONAL LENGTHS SUPPLIED AT A COST OF $3.00/FOOT/HOSE.
STANDARD CONTROL IS A HAND HELD PENDANT SWITCH OPTIONAL DUAL FOOT SWITCH INSTEAD OF THE HAND HELD PENDANT SWITCH $150.00.
WE RECOMMEND THE FOLLOWING:
5-HP POWER SUPPLIES FOR PRESSES 50-TON AND SMALLER.
10-HP POWER SUPPLIES FOR PRESSES 50-TONS AND LARGER.
WARRANTY
ALL ALTERNATIVE PRESS HYDRAULIC PUNCH PRESSES ARE WARRANTIED AGAINST MANUFACTURERS DEFECTS AND WORKMANSHIP FOR ONE YEAR FROM THE DATE OF SHIPMENT. THE CUSTOMER IS RESPONSIBLE FOR SUPPLYING ADEQUATE POWER TO THE MACHINE. ALTERNATIVE PUNCH WILL REPLACE, FREE OF CHARGE, ALL PARTS FOUND TO BE DEFECTIVE AND SUBJECT TO WARRANTY. PARTS SUCH AS HOSES, WHICH ARE EXPECTED TO BE REPLACED DUE TO NORMAL USAGE, ARE NOT COVERED. THIS WARRANTY DOES NOT COVER FAILURE RESULTING FROM ALTERATIONS, MODIFICATIONS, UNAUTHORIZED REPAIR OR MISUSE. IN NO EVENT SHALL ALTERNATIVE PUNCH BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOST PROFITS.